Blue Ox TrackPro Weight Distribution Shank for 3" Hitches - 9 Hole Adjustment

Video Transcript for Review of Blue Ox Weight Distribution Shank for 3 inch Hitches - BLU87HR

Hi, everyone. Steve here with etrailer.com. Today we're looking at a Blue Ox TrackPro Weight Distribution Shank for three inch hitches with nine holes of adjustment. That's right, folks, so a three inch shank, so three inch by three inch square tubing here. It's gonna fit a three inch only. It's gonna slide into that three inch hitch receiver, and then provide an attachment point for your Blue Ox TrackPro Weight Distribution head assembly.

You get the included hitch pin and clip here. You have nine adjustment holes here. These holes are spaced one and a quarter inches on center and that's gonna give you lots of different options as far as heights. It's gonna let you level the trailer with that head assembly and the drop or rise position are both available to you so you can flip this over and use it in the rise if you needed to. Now the max gross trailer weight on this is 20,000 pounds.

You've got the welded gusset here in place to make it super strong. The max tongue weight is 2,000 pounds. Now for some quick dimensions, overall, if I count the front here all the way to the back, I got 13 inches. This is a 13 inch ruler and when I went from the center of the hitch pin hole to the center of the mounting holes for the head assembly, I got right on nine inches on center. And then for an overall height, this part here is taller than down here.

I got right at 12 inches tall when I had it on a flat level surface. So there's all your dimensions and everything. Again, a nice product here by Blue Ox. This is the Blue Ox TrackPro Weight Distribution Shank for three inch hitches. I'm Steven.

Thanks for watching. And, as always, stay safe while you're towing.